FOLDING ARM

Small Medical Monitor and Instrument Maneuvering Wallmounts

The SINGLE FOLDING ARM is used for larger heavier medical instruments weighing 65 pounds (30 Kg) maximum with Model A or B Tilt/Swivel Head. Model C Tilt/Swivel Head limits arm to 33 pound (15 Kg). The standard wall track has 12 inches of elevation adjustment for the base arm. 38 inch track with 31 inches elevation adjustment also available. Backing Plate recommended for heavier loads.

 

 

Specifications
Medical Monitor Wallmount
For heavier instruments 

Mounts to a single steel or wood wall stud 

Load Capacity 65 lb (30 kg) with A/B Head

Load Capacity 33 lb (15 kg) with C Head

OSHPD Preapproved 26 lbs (12Kg)
Optional Instrument Adapter 

                                                                   Model FA16B with MP5 Adapter

 

 

PART NUMBER	DESCRIPTION
FA16A	16 inch Arm, "A" Head, for AP type Adapter Plate
FA16B	16 inch Arm, "B" Head, for MP type Adapter Plate
FA24A	24 inch Arm, "C" Head, for AP type Adapter Plate
FA24B	24 inch Arm, "C" Head, for MP type Adapter Plate
T19	19 inch Wall Track (included)
T38	38 inch Wall Track (optional)
AP12X11	Instrument Adapter Plate (12 inch W x 11 inch D)
MPX	Slide-from-the-Side Adapter Plate: X = Width (inches)
BPULT	Backing Plate for 19 inch Wall Track

 

The DOUBLE FOLDING ARM is used to extend medical instruments and small monitors out into the room, and permits them to be folded against the wall. Suitable for equipment weighing 22 pounds (10 Kg) or less. This device may also be used for small TV receivers. The base arm is 18 inches or less. The outer arm is 15 inches or less. The type C Tilt/Swivel Head is a polymer socket and stainless steel Tilt/Swivel Head. The standard wall track has 12 inches of elevation adjustment for the base arm. 38 inch track with 31 inches elevation adjustment also available.

 

Specifications
Medical Monitor Wallmount
For small/light instruments 

Mounts to a single steel or wood wall stud 

Load Capacity 26 lb (12 kg)
Optional Instrument Adapters

 

                                                

 

Model FA18X15 with MP5 Adapter

 

 

PART NUMBER	DESCRIPTION
FAYXZA	Double Folding Arm, "C" Head, for AP type Adapter Plate
FAYXZB	Double Folding Arm, "C" Head, for MP type Adapter Plate
T19	19 inch Wall Track (included)
T38	38 inch Wall Track (included)
AP12X11	Instrument Adapter Plate (12 inch W x 11 inch D)
MPX	Slide-from-the-Side Adapter Plate: X = Width (inches)
	"Y" = length of base arm (18 inches max)
	"Z" = length of outer arm (15 inches max)